wear resistance的例句大全

Although it is an alcohol-based sand coating, it has exhibited good in suspension, brushing, wear resistance.

尽管它是一种醇基砂状涂料, 但具有悬浮稳定性高, 涂刷流畅, 涂层强度好等特点.

Bimetallic Compound Wear Resistance Material Developed by Cast in Place Surface Alloying

铸渗法制造双金属耐磨复合材料

The wear resistance, hardness, and other mechanical properties of the composites with nickel coated SiC were better than those of the composites with bare SiC particles.

而且加入镀镍SiC的复合材料的耐磨性、硬度和拉伸强度等力学性能比加入相同含量的未镀SiC的材料的性能要好；

Heat treatment can improve the wear resistance and hardness of the electroless composite plating. The existence of composite particle does not influence the microstructure of the coating.

化学复合镀层的性能受涂镀条件的影响，复合颗粒不影响镀层的微结构。

Among these physical properties are appearance, wear resistance, hardness or brittleness, residual stress, porosity, thickness, and deposit uniformity.

这些物理性能有外观，抗磨损性，硬度或脆性，残余应力，孔椁率，厚度和沉积层的均匀度。

The results show that the wear resistance and hardness of coating can be enhanced by Ni based alloy coating added with SiC.

结果表明，添加SiC的镍基合金涂层能够提高熔覆层的耐磨性和硬度。

Characteristics of wear resistance and hardness distribution of subsurface of martensitic steels

马氏体钢耐磨性与亚表层硬度分布的关系

Effect of laser scanning speed on phase constitution, microstructure, microhardness and wear resistance of laser-cladding stellite hard facing alloy by using of across-flow-stype CO_2 laser of power 1. 5 kW has been investigated.

本文报导应用横流式连续CO2激光器，采用不同激光扫描速度，对熔覆Stellite12钴基硬面合金的合金层的相组成、微观组织结构对耐磨性和显微硬度影响的研究结果。

F 4 filler such as glass fiber, graphite , metal powder to increase its temperature, and wear resistance.

F4填充如玻璃纤维 、 石墨粉 、 金属粉等以提高其耐温性 、 耐磨性.

This material possesses high strength and toughness, its wear resistance being similar to that of ceramics. As a result, these tools show good performance in cutting high hardness materials.

这种刀具材料的耐磨性与陶瓷材料相近，并具有较高的强度和韧性，在切削高硬度材料时表现出良好的性能。

The effects of surface modification on improving wear resistance, erosion resistance and biological properties were illuminated.

阐述了表面改性对提高钛合金的耐磨性能 、 耐腐蚀性能和生物活性的作用.

The relationship between wear resistance and microstructure of high chromium white cast iron was studied.

内应力是造成高铬白口铸铁磨球在生产和服役过程中出现变异和失效的主要原因.

Inadequate resistance to wear will lead to rapid loss of clearances and drop in pump performance.

如果耐磨蚀能力不足,则将导致间隙迅速增大和泵性能下降.

Coining and striking punches are other examples of carbon tool steels that require high wear resistance.

压模印和醒目的打洞器是碳工具需要的钢高度的其他例子穿着抵抗.

The wear ratio, resistance, integrality and hardness of polycrystalline diamond compacts ( PDC ) are investigated.

通过正交试验法,以磨耗比 、 电阻 、 完整性、硬度为指标,设计了金刚石 复合片 的合成工艺.

It has good characters of high hardness, good wear resistance form crescent depression etc.

硬度高, 耐磨性好,抗月牙洼能力强.

They perceived that the enemy was trying to wear down their resistance.

他们明白敌人是想用消耗的办法来制服他们的抵抗.

HRc ≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.

耐磨 、 耐气蚀、抗氧化. 堆焊高炉料钟、破碎机件.

High-elasticity, good wear-resistance, oil-resistance. Small circle resilience difference , high metal core stability.

耐油、弹性好、耐磨性优良, 圆跳动公差小, 金属芯平衡度高.

The erosion wear resistance is one of the most important properties of abradable seal coating.

抗冲蚀性是可磨耗封严涂层最重要的性能.